==========================================
README for Downloading Peplink GPL Sources
==========================================

Thanks for your purchase of Peplink products.  You are eligible to download the Peplink GPL Sources free of charge.  

*** PLEASE READ THIS NOTICE BEFORE USING THIS SOFTWARE ***

1. Peplink GPL Sources ("Software") is only provided for use on the following development platforms
   - Peplink Debian
   - Peplink Plus
   - Peplink Dual Point Point
   - Peplink SBC-Classic
   - Peplink SBC-WINTI

2. The use of the software on any other Peplink products (e.g. Balance Series) is not supported and will void the product warranty.

3. If you download any custom firmware onto a non-development Peplink device (e.g. Balance Series), such unit will lose the ability to install any commercial software (e.g. Balance software).  This update process is irreversible.

4. If you want to restore the commercial software (e.g. Balance software) back to a unit running the SDK software, you will need to send the unit back to Peplink for servicing. Shipping and handling charges will apply. 

* BY DOWNLOADING THE SDK BELOW, YOU AGREE TO BE ABIDED BY THE ABOVE TERMS. *  

Download link:
http://download.peplink.com/MANGA-SDK/manga-sdk-2.4.1.tar.gz
MD5: 53e85ff0fe7a9d5555ff29d6f2d12e67
Size: 117041045 bytes

If you have any questions, please contact us at http://www.peplink.com/contact/support/.

Thank You

The Peplink Team